Back to: Turntable Semi-Automatic

HP 2100-SRT (High Profile)

Print
The 2100SRT is affordable and simple with more standard features than any other pallet wrapper in this price range. A quality machine built with quality components and supported by a local qualified distributor.
Cousin's Packaging
Description

https://www.youtube.com/watch?v=DlcjvZRru1U&list=PLw60JQWF_qgb72rjdsyuJyEF1FM7kxv8N&index=32&t=0s

SPECIFICATIONS

Specification Description
Production Speed
  • 1-35 loads per hour (Single Turntable)
    NOTE: Process rates will vary with load size, number of wraps & forklift load/unload time
Load Capacity
  • Maximum load size to safely clear the tower: 56″ W x 56″ L (79″ load diagonal)
  • Maximum load size to remain inboard of the turntable: 48″ W x 48″ L (68″ load diagonal)
  • Maximum load height: 75″ H (plus up to 4″ top overlap)
Turntable
  • 48″ octagonal 5/16″ thick formed steel plate turntable
  • 4 point caster support system
  • Turntable height less than 11″ from floor
  • ANSI # 50 direct chain drive c/w chain tensioner
  • 3-12 RPM rotational speed c/w soft start acceleration
  • 1/2 HP AC variable speed motor
  • Final revolution deceleration and positive stop alignment
  • Front and back forklift ports for easy movement
  • Accu-Count exact turntable positioning system for additional film savings!
Select Options
  • OAFS – Auto Film Start (Includes film holding clip & pendant start/stop station)
  • OBFD – Broken Film/Out of Film Detection c/w Automatic Machine Reset and Fault Indication
  • OCP2 – Cold Weather Package (down to 32ºF)
  • ODP1 – Dusty Package
  • OEB1 – 2 ft. Base Extension for Maximum 95″ Diagonal (Note: 71″ diagonal is standard)
  • OEWH-110-S – Tower Extension for 110″ Wrap Height Capability (Note: Standard is 80″. All machines with tower extensions will be hinged and shipped knocked-down)
  • OPABL – Beacon Light with Red & Green lens – (Indicates run, clear or fault conditions)
  • OPSCLP-SW250 – SCALE PACKAGE (PLATFORM) – SureWeigh Platform Scale with GSE250 Digital Weight Indicator (Notes:
  • OSCRMPP Scale Ramp option is required for pallet jacks. Machine with base extension option requires a factory quote)
  • ORMP-S – Ramp for manual pallet jack loading – 48″ W x 60″ L
  • OPE1-S – 24″ L x 48″ W Porch Extension for Powered Pallet Jacks
  • OPE2-S – 40″ L x 48″ W Porch Extension for Powered Pallet Jacks
  • OSCBI-250 – LOW PROFILE SCALE PACKAGE – Built-in Load Cells with GSE250 Digital Weight Indicator (Notes: SCBIRMP Scale Ramp option is required for pallet jacks. Machine with base extension option requires a factory quote)
  • OSCBIRMP – Heavy Duty Scale Ramp for use with built-in load cells
  • OSCRMPP – Complete 120″L x 48″W Heavy Duty Scale Ramp & Porch for use with platform scales
  • OSSPK – Starter Spare Parts Kit
Film Carriage Elevator
  • 1/2 HP AC variable speed motor
  • ANSI #40 direct chain drive c/w shock dampener & Anti-Fall Safety Device
  • Maintenance free carriage guidance system
Film Delivery System
  • NEW Super Rapid Thread II ™ 20″ capacity pre-stretch film carriage
  • Special Film Threading Device – Uniquely orientates the sticky side of the film against the pre-stretch rollers and the inside of the load.
  • 1/2 HP AC variable speed motor
  • Fully electronic dynamic dancer corner compensation
  • 33% to 313% fixed stretch capability
  • Pre-stretch ratio variable using easy sprocket change
  • Carriage Descent Obstruction Safety Shut-Off Device
  • Rapid Thread ™ Safety Door with auto power cut-off switch
  • Side mounted film carriage for operator convenience and safety
  • Superior film-to-roller contact area
  • Lifetime warranty on pre-stretch rollers
Electrical Input Requirements
  • 115 Volts 1 Phase 60 Hz 15 Amps

FEATURES

Feature Description
Control Features
  • Electronic controls with LCD operator interface
  • Power Off – On – Reset switch & Power On indicator light
  • Single button Auto Wrap Cycle Start/Pause
  • Cycle Pause for applying top sheets
  • Reinforce Wrap control for mid-wrapping
  • Base or Top Wraps First program
  • Up Only or Up/Down wrap program
  • Emergency Stop button
  • Turntable Jog button
  • Film Carriage Lower & Raise buttons
  • Film Tension (Force-to-Load) control
  • Separate film carriage raise & lower speed controls
  • Operator programmable turntable speed control
  • Triple beam automatic load height detection sensor for dark or shiny loads
  • Separate 1 to 12 revolution top & bottom wrap control
  • Selectable Reduced Film Tension parameters for wrapping top and/or bottom of load
  • A – B – C wrap program selector with capability to input and store unique wrapping parameters for each program
Structural Features
  • All structural steel construction
  • Forklift truck portable base structure design – lifting tubes included for front and rear access
  • Structural steel tube machine tower with sheet metal covers
  • Electro-static powder coated paint finish